PRE-MIX CONCRETE
SUGGESTED USES
Stone Bond can be used to adhere stone vertically and horizontally, as a scratch coat, and as a mortar joint grout.
One 66lb (30kg) bag will cover approximately 13 sqft (1.2 sq.m.) at ½” (13mm) thickness. Coverage will vary with joint width and depth.
Note: Use only clean potable water.
Consult stone/veneer manufacturer for proper substance preparation and installation.
Note: Not recommended for use where stone is very smooth or has a polished back.
Stone Bond mortar mix is a construction grade mix designed for the installation of manufactured and natural stone. It can be used as a bond coat, scratch and brown coat and a mortar joint grout over concrete and masonry surfaces or galvanized, expanded metal lath.
Kwik Mix Stone Mix contains Portland Cement. Direct contact my irritate eyes and skin. Wear protective clothing (gloves, boots and safety glasses) when using this product. Wash exposed areas promptly with water. If any material gets into the eyes, rinse thoroughly with clean water and seek medical attention immediately.
DO NOT TAKE INTERNALLY.
KEEP AWAY FROM CHILDREN AND PETS.
Clean up is easy with soap and water.
Rinse tools before material hardens.