Contact us

PORTLAND AND MASONRY CEMENTS

Masonry Cement Type N

Used in normal residential and non-residential applications such as veneer, curtain and partial walls, chimneys and back up walls.

SUGGESTED USES
Exterior and interior masonry work: 

  • Walls
  • Chimneys
  • Tuck pointing
  • Parging
  • Loadbearing walls requiring low compressive strength
  • Non loadbearing walls
Technical Data
Safety Data Sheet
Concrete Calculator

Each 66lb (30kg) of Masonry Cement mixed with 3cuft of sand will produce 3cuft mortar.

  • Read safety instructions before using this product

Have materials required on hand: clean water, sand (2 ¼ -3cuft loose damp Masonry Sand), watertight mechanical mixer, measuring pots, trowel, mortar board, etc.

Mix ½ water and ½ sand required to 1 bag Masonry Cement Type N followed by the remaining amount of sand and enough water to bring mix to desired consistency. Mortar should be mixed for at least 5 minutes once all ingredients are in the mixer. Each batch should be the same consistency.

For best results:
Do’s
  • Although minor retempering is allowed, mortar should be used or discarded after 90 minutes
  • When mixed with sand that meets requirements of specifications ASTM C-144  Type N Masonry Cement produces mortar that exceeds ASTM C-270 specification for mortar which requires a minimum average 28-day compressive strength of 750psi and 75% minimum water retention.
Don’ts
  • Avoid working in extreme weather conditions 
  • Don’t attempt to move or adjust masonry units once the mortar has begun to stiffen

Wear tight-fitting goggles, protective respiratory masks, gloves and protective clothing. This product, dry or wet, can cause irritation and severe burns. In case of eye contact, flush with plenty of water and seek medical attention. Repeated inhalation can cause lung disease. DO NOT TAKE INTERNALLY. DO NOT INHALE. KEEP AWAY FROM CHILDREN AND PETS.

 

Clean up with soap and water.

Rinse tools before material hardens.

Packages should be stored to keep free from moisture.

Learn more about our products

Contact us