Masonry Cement Type S

Masonry Cement is combined of finely ground Portland Cement, sand and water to form the binding agent used by Masons. It is categorized in strength characteristics designated by the letter 'N', 'S' or 'M'. Type S is a higher strength Masonry Cement.

Uses

Used in applications exposed to the elements or
in foundations, walls and hollow or solid piers.

Features

• higher strength masonry cement
• excellent plasticity and water retention
• early strength for both summer and winter use
• low soluble alkali content

When mixed with sand, Masonry Cement Type S produces mortar that exceeds ASTM C-270 specification for mortar which requires a minimum average 28-day compressive strength of 1800psi and 75% minimum water retention.
73 LB (33 KG) BAGS, 40 PER SKID

Coverage

Each bag of Masonry Cement mixed with 3 cu ft of sand will produce 3 cu ft of mortar.

Preparation

Materials required: clean water, sand:2 1/4 - 3 cubic feet loose damp masonry sand, watertight mechanical mixer, measuring pots, trowel, mortar board and safety clothing.

Directions

Mix 1/2 water and 1/2 sand required to 1 bag of Masonry Type S followed by remaining amount of sand and sufficient water to bring mix to desired consistency. Mix for at least 5 minutes after all ingredients are in mixer.

For best results
Use measuring cups so that each batch mixed is the same consistency.

Safety

Wear tight-fitting goggles, protective respiratory masks, gloves and protective clothing. This product, dry or wet, can cause irritation and severe burns. In case of eye contact, flush with plenty of water and seek medical attention immediately. Repeated inhalation can cause lung disease. DO NOT TAKE INTERNALLY. DO NOT INHALE. KEEP AWAY FROM CHILDREN and PETS.

Clean Up

Wash thoroughly after handling. Clean up with soap and water. Rinse tools before material hardens.

Click here for Material Safety Data Sheets